Dr. P. Venkata Ramaiah obtained PhD in Mechanical Engineering from Sri Venkateswara University, Tirupati and carrying out research in all areas relating to production systems, Design optimization and characterization of materials. He has conducted extensive studies on parametric optimization in all areas of mechanical engineering. He has guided 09 Ph.D scholars and about 70 M.Tech project students, published about 100 research papers in journals/ conferences. He also serves as member of board of studies in reputed universities and as peer reviewer for reputed International Journals.
General Publications
Recent Publications
- Rajesh, M. Yohan, P. Venkataramaiah, M. Vani pallavi “Optimization of Cutting Parameters for Minimization of Cutting Temperature and Surface Roughness in Turning of Al6061 Alloy” Materials Today: Proceedings 00 (2015) 000–000.
- Anand Babu and P. Venkataramaiah “AHP-DENG’S Similarity Based Optimization of WEDM Process Parameters of Al/SiCp Composite ” American Journal of Materials Science and Technology (2017) Vol. 6 No. 1 pp. 1-14 doi:10.7726/ajmst.2017.1001
- Subbarama Kousik, Venkataramaiah. P., (February 2017) “Chip Morphology In Drilling Of Al6063-Mgo NMMC With Hss & Tin Coated HSS drill Tool” Manufacturing Technology Today, Vol. 16, No. 2.
- Keerthana, Venkataramaiah. P., G.Vijaya Kumar (February 2017) “ Analysis of Surface Roughness , Material Removal rate and Temperature in Milling of En31for Die Making under Minimum Quantity Lubrication Condition ” Manufacturing Technology Today, Vol. 16, No. 2.
- Manjunath, Bhanodaya Reddy, G., Venkataramaiah. (March 2017) “Studies On machining Characteristics &optimal process parameters in Wire EDM of Al6082 HNMMCS” Manufacturing Technology Today, Vol. 16, No. 3.
- Anand Babu and P. Venkataramaiah “Multi-response Optimization in Wire Electrical Discharge Machining (WEDM) of Al6061/SiCp Composite Using Hybrid Approach” journal of manufacturing science and production, 2015, 15(4), 327-338, DOI 10.1515/jmsp-2015-0010.
- Anand Babu, P. Venkataramaiah “Evaluation of aluminium hybrid metal matrix composites by analytical hierarchy process (AHP) method” Manufacturing technology today, Vol. 17, No. 02, (2018), pp. 3-14.
- Anand Babu, P. Venkataramaiah, Saideepthi yerrathota “Material selection for preparation of aluminium hybrid MMCs” Material Today: Proceedings, 5(2018), 12209-12222.
- Anand Babu, P. Venkataramaiah “Influence of flyash/SiCp/Al2O3 on mechanical characteristics of Al-Mg based hybrid metal matrix composites synthesized by stir casting process” ARPN journal of engineering and applied sciences, Vol. 13, No. 6, (2018), pp. 2080-2089.
- Sambasiva Reddy, B. Prasad Kumar, P Venkataramaiah “Optimization of Process parameters in Injection Moulding of Cam Bush using DFA and ANOVA” International Journal of Emerging Technology and Advanced Engineering, Vol. 5, Issue No., March2018.
- T, Venkataramaiah. P, (July 2018) “Optimization of process parameters in drilling of AMMC using sine cosine algorithm” Manufacturing Technology Today, Vol. 17, No. 7, pp. 3-10.
- Venkataramaiah P, Anand Babu K, (2018), “Selection of optimum aluminium hybrid metal matrix composite using Fuzzy AHP-VIKOR method” International Journal of Research and Analytical Reviews, 5 (12), pp. 256-254.
- Anand Babu K and Venkataramaiah P, (2018), “Optimization of material factors in the casting of aluminium hybrid metal matrix composites using Taguchi coupled Entropy-VIKOR approach” International Journal of Applied Engineering Research, 13 (22), pp. 16111-16116.
- Venkataramaiah P, Anand Babu K, (2018), “Selection of optimum aluminium hybrid metal matrix composite using Fuzzy AHP-VIKOR method” International Journal of Research and Analytical Reviews, 5 (12), pp. 256-254.
- Karthik , Venkataramaiah P,(2018) “ Multi Objective Optimization of Process Parameters in Drilling of AL6061-T6 and Brass C360 Alloys By WAPAS Method”, Manufacturing Technology Today, Vol. 17, No. 12.
- Venkataramaiah P, Anand Babu K, (2019), “optimization in wire-cut edm of aluminium hybrid metal matrix composite using taguchi coupled deng’s similarity based approach” P.B. Sci. Bull., Series D, Vol. 81, Iss. 3, 2019, pp169-186.
- Hari Haran V., Venkataramaiah P. “ Mathematical modelling and analysis of parabolic collector” Material Today https://doi.org/10.1016/j.matpr.2020.11.465
- Hari Haran, P.Venkataramaiah (2019), “Performance Analysis of Copper Absorber Tube Parabolic Collector”, International Journal of Engineering and Advanced Technology (IJEAT), pp: 5360–5362, DOI: https://doi.org/10.35940/ijeat.B5147.129219.
- Hari Haran, P.Venkataramaiah “ Optimization and simulation of solar parabolic collector with different absorber tubes and working fluids” AIP Conference Proceedings 2297, 020016 (2020); https://doi.org/10.1063/5.0030133.
- Kiran Kumar and P. Vemkataramaiah “Experimental Investigation on Surface Integrity of Inconel 718 under Hot Machining and Optimisation of its Process Parameters” Advances in Materials and Processing Technologies (Taylor and Francis)`, Volume 7, Issue 1, PP: 1-12, ISSN: 2374-068X, DOI: 10.1080/2374068X.2020.1860503 (January 2021).
- Hari Haran, Venkataramaiah P “Performance Analysis of Solar Parabolic Collector Using Al2O3 Nanofluids” European Physical Journal (EPJ) Plus, Volume No. 136, Article number 366, ISSN: 2190-5444, https://doi.org/10.1140/epjp/s13360-021-01314-1 (7, April 2021).
- A Kiran Kumar, P Venkataramaiah, Experimental investigation on surface integrity of Inconel 718 under hot machining and optimization of its process parameters, Advances in Materials and Processing Technologies, Taylor and Francis, https://doi.org/10.1080/2374068X.2020.1860503, 2021
- A Kiran Kumar, P Venkataramaiah, Heat assisted machining of Inconel 718 Alloy using Abaqus/Explicit, Materials Today: Proceedings, vol.18, pp. 4531-4536, 2019.
- A Kiran Kumar, P Venkataramaiah, Optimization of Process parameters in hot machining of Inconel 718 alloy using FEM, International Journal of Applied Engineering Research, vol.13, pp. 2158-2162, 2018.
- Ramanjaneyulu, P. Venkataramaiah, K. Dharma Reddy,Multi parameter optimization of deep drawing for cylindrical cup formation on brass sheets using Grey Relational Analysis, Materials Today: Proceedings,Volume 18, Part 7,2019,Pages 2772-2778,ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2019.07.142.
- Naresh Kumar Reddy, P. Venakataramaiah,” Line Balancing using Genetic Algorithm for the improvement of efficiency,” Industrial Engineering Journal, Volume XII, Part 12 ,2019,Pages 27-36 ISSN 2214-7853, 0970-2555 December, 2019
- Madduleti,, P. Venkata Ramaiah ,” Prediction of dynamic parameters in turning of aluminum metal matrix nano composite by using constitutive models and FEA, Manufacturing Technology Today, Vol. 20, No. 1, January 2021.
- Kiran Kumar and P. Vemkataramaiah “Experimental Investigation on Surface Integrity of Inconel 718 under Hot Machining and Optimisation of its Process Parameters” Advances in Materials and Processing Technologies (Taylor and Francis), Volume 7, Issue 1, PP: 1-12, ISSN: 2374-068X, DOI: 10.1080/2374068X.2020.1860503 (January 2021)
- Hari Haran, P.Venkataramaiah “Mathematical modelling and analysis of parabolic collector” Materials Today: Proceedings (Elsevier), Volume 46, Part 9, pp: 3308-3312, January 2021
- V. Hari Haran, Venkataramaiah P “Performance Analysis of Solar Parabolic Collector Using Al2O3 Nanofluids” European Physical Journal (EPJ) Plus, Volume No. 136, Article number 366, ISSN: 2190-5444, https://doi.org/10.1140/epjp/s13360-021-01314-1 (7, April 2021)
Books
Books/Book Chapters
1.Part of the Lecture Notes in Mechanical Engineering book series (LNME)”FEM-Based Hot Machining of Inconel 718 Alloy”
2. Part of the Smart Innovation, Systems and Technologies book series (SIST, volume 169) “Study on Solar Parabolic Trough Collector with Different Copper Absorber Tubes”
3. “Optimization study on WEDM of aluminum metal matrix composite” ISBN: 978-3-639-51699-9 Publisher: Scholar’s Press.
Research interest
Design optimization, Vibration Engineering, Dynamics of cutting tools, Solar Engineering, Composite Materials and Unconventional Machining.
Research projects
Conference
Recent Conference Papers
- Dadakhalandar, M. S. Sukumar, P. Venkataramaiah, G. Bhanodaya Reddy “Prediction and Optimization of Flank Wear and Surface Roughness in Down Milling of Al-7075+(Al2O3)P MMC using TI-N Coated Helical Milling Cutter” First International Conference on ―Productivity, Efficiency and Competitiveness in Design and Manufacturing‖ 7 – 9 January 2016 Department of Mechanical Engineering, PSG College of Technology – Coimbatore, Tamilnadu, India.
- Chella Nanda Kishore, A Kiran Kumar, P Venkataramaiah “Experimental Investigation of Machining Parameters of EN8 Steel Using Carbide Tipped Tool in Hot Machining” First International Conference on ―Productivity, Efficiency and Competitiveness in Design and Manufacturing‖ 7 – 9 January 2016 Department of Mechanical Engineering, PSG College of Technology – Coimbatore, Tamilnadu, India.
- Rallabandi Shankar, M. S. Sukumar and P Venkata Ramaiah “Application of Immune Optimization Technique for Milling Parameters on Al6061-5%Al2O3” First International Conference on ―Productivity, Efficiency and Competitiveness in Design and Manufacturing‖ 7 – 9 January 2016 Department of Mechanical Engineering, PSG College of Technology – Coimbatore, Tamilnadu, India.
- Vemula Priyank, K. Dharma Reddy and P Venkataramaiah “Optimization of Depth of Cut Using Hooke and Jeeves Algorithm In Grinding Of Steels” First International Conference on ―Productivity, Efficiency and Competitiveness in Design and Manufacturing‖ 7 – 9 January 2016 Department of Mechanical Engineering, PSG College of Technology – Coimbatore, Tamilnadu, India.
- “Development of features extraction and Recognition system for compouter Aided process planning” published in the Two Day National Conference on New Frontiers In Mechanical Engineering, 18th – 19th July 2014, Mechanical Engineering Department, University college of engineering Kakinada, JNTU Kakinada Andhra Pradesh, India.
- “Optimization and prediction of parameters in face milling of Al-60961 using Taguchi and ANN approach” presented in 12th global congress on manufacturing and management held during 8th – 10th Dec 2014 at VIT University, Vellore, Tamil nadu, India.
- S Ujjaini Kumar, P. Venkataramaiah “Process Parameter Optimization of Wire Electrical Discharge Machining of Stellite 6b Alloy Using Taguchi Approach” 4th International Conference on Innovations in Mechanical Engineering (ICIME-2021) Organized by Guru Nanak Institutions, Ibrahimpatnam, Hyderabad, India (26-27),2021.
- Hari prasad, P. Venkataramaiah “Study on influence of reinforcements on different properties of Aluminum Hybrid Metal Matrix Composites” The 3rd International Conference on Processing and Characterization of Materials (ICPCM 2021) Organized by National Institute of Technology, Rourkela,December 7-8, 2021.
- Dr. N.Rajesh, Mr.M. Guru Mahesh, P. Venkataramaiah” Prediction of taper angle in laser drilling of S32750 using integrated ANFIS” the 3rd International Conference on Processing and Characterization of Materials (ICPCM 2021) Organized by National Institute of Technology, Rourkela,December 7-8, 2021.
Memberships:
Life Member in ISTE.
Life Member in Tribology Society of India (TSI).
Life Member in Institution of Engineers India.
Life Member in IAEng
Positions Held:
Additional Chief Superintendent of Exams,
Nodal officer for TEQIP – I and Workshop Superintendent.
Board of studies chairman(UG)